design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. electric double layer capa citors (gold capacitor)/ rg ? eec-2 ? + 19.0 0.3 21.0 max. 1.0 0.1 5.0 0.3 0.20 0.05 5.0 0.5 5.5 0.5 4.0 0.3 20.5 max. 20.0 0.5 19.0 0.3 1.0 0.1 0.2 0.05 6.5 max. 3.5 0.3 sleeve 10.0 0.5 0.2 0.05 3.0 0.5 10.5 max. 11.5 max. 6.0 max. 0.8 0.05 (1.7) sleeve 0.8 0.05 (1.7) 3.0 0.5 11.5 max. 10.5 max. 0.2 0.05 5.0 max. 5.0 0.8 features endurance: 85 c 2000 h can be discharged ma current rohs directiv e compliant stacked coin type series: rg speci? cations di men sions in mm(not to scale) recommended applications backup of data /rtc of base station, electronic meter, and industrial equipment for assist of rapid load change standard products do not use re? ow sp;dering.(ir, atmospherheating methods, etc.) please refer to the page of ?pplication guidelines? ( ): please use v or h to indicate terminal type. the recommended discharge current is a reference value. please design your equipment(circuit) in consideration of ir dorop. category temp. range ?5 ? to +85 ? maximum operating voltage 3.6 v dc nominal capacitance 0.22 f 1.0 f capacitance tolerance ?0 % to +80% characteristics at low t emperature capacitance change ?0 % of initial measured value at +20 ? (at ?5 ?) internal resistance < 5 times of initial measured value at +20 ? (at ?5 ?) after 2000 hours application of maximum operating voltage at +85 ? endurance capacitance change ?0 % of initial measured value at 20 ? ?0 % of initial measured value at 20 ? internal resistance 100 or less 40 or less after 2000 hours storage at +85 ? without load (voltage) shelf life capacitance change capacitance change shall meet the speci? ed limits for endurance internal resistance internal resistance shall meet the speci? ed limits for endurance maximum operating voltage capacitance internal resistance (initial speci? ed value) recommended discharge current parts number mass min. packaging q'ty (v dc) (f) ( ) at 1 khz (ma) (g) (pcs) 3.6 0.22 < 50 1 or less eecrg0v224() 1.0 200 1.0 < 20 20 or less eecrg0v105() 4.1 100 rg series 1.0(f) te r minal : v terminal : h rg series 0.22(f) te r minal : v terminal : h (unit : mm) 00 nov. 2012
|
